• Worldwide delivery & service
  • Since 2000

Charles CH-430

High Speed ​​Precision LATHE

More information
  • Swing over bed 430 mm
  • Distance between the centers 750/1500/2000 mm
  • Spindle bore 58 mm
  • Speed 42-1800 rpm
Price on request
Delivery time on request Please contact us for the current delivery time
Request a quote Response within 2 days


  • Condition
  • Swing over bed
    430 mm
  • Spindle bore
    58 mm
  • Distance between centers
    750 mm, 1000 mm, 1500 mm, 2000 mm
  • Speed
    40 – 2300 rpm (Optioneel), 42 – 1800 rpm
  • Lathe control

Product description

  • 12 Step Spindle Speed ​​to Reduce the Processing Time of Workpieces of All Sizes. (3 steps for variable sequences)
  • 58mm spindle bore to machine larger mandrels.
  • Stand-Alone Control Box With Overload Protection is Easier to Maintain and Safer.
  • there is no need to change gearing system shifting by using general purpose gearbox, which also has advantages such as low noise, a safety cut protection on the gear and the use of a cyclic lubrication system.
  • All Gears In The Head Are Carburized By Heat Treatment and Precision Ground to Extend the Life of the LaThe.
  • Strong Tailstock with Larger Shaft Diameter, Special Design Center and Anti-Impact Device to Prevent the Tailstock From Falling Off.
  • Closed Oil Immersion System That Gives Better Lubrication Results in apron.
  • Longer Tool Hole Stroke to Meet Processing Needs.
  • The Foundation Bed is cast in One Piece and the Bed is Precision Ground and Made through High-Frequency Heat Treatment.
  • Emergency Foot Stop Device That Can Shut Off The Main Power At The Same Time To Ensure The Safety of the Operator And The LaThe.
  • The opening can be removed accordance to process larger workpieces.

The Charles Lathes Distinguish Themselves from Other Lathes on the Following Points:

  • Very stable forged Steel Main spindle which is mounted on 3 points
  • One-Piece Molded Bed (Very Stable) With Bag
  • Hardened and Ground Guideways
  • Hardened and Ground Gears in a Sealed Continuous Oil Bath
  • Frequency Controlled Speed ​​40-2300RPM with 3 Mechanical Steps (Optional)
  • Excellent Price-Quality Ratio

equipped with:
Chisel Holder
Steel Three-Claw Round 250mm
Cast Iron Four Claw Round 300mm
Fixed Glasses
Running Glasses
Threading Clock
Cooling Installation

available at extra cost:
Multifix Chisel Holder with 4 Bolts
Bison Three-Claw
Bison Four-Claw
Digital Readout Easson, Mitutoyo or Sony
Frequency Controlled Speed ​​in 3 Mechanical Steps 25-2300 RPM
Rotating Center, Chuck, Adapter Sleeves

Select language