Charles CH-430

• 12 Step Spindle Speed ​​to Reduce the Processing Time of Workpieces of All Sizes. (3 steps for variable sequences)
• 58mm spindle bore to machine larger mandrels.
• Stand-Alone Control Box With Overload Protection is Easier to Maintain and Safer.
• there is no need to change gearing system shifting by using general purpose gearbox, which also has advantages such as low noise, a safety cut protection on the gear and the use of a cyclic lubrication system.
• All Gears In The Head Are Carburized By Heat Treatment and Precision Ground to Extend the Life of the LaThe.
• Strong Tailstock with Larger Shaft Diameter, Special Design Center and Anti-Impact Device to Prevent the Tailstock From Falling Off.
• Closed Oil Immersion System That Gives Better Lubrication Results in apron.
• Longer Tool Hole Stroke to Meet Processing Needs.
• The Foundation Bed is cast in One Piece and the Bed is Precision Ground and Made through High-Frequency Heat Treatment.
• Emergency Foot Stop Device That Can Shut Off The Main Power At The Same Time To Ensure The Safety of the Operator And The LaThe.
• The opening can be removed accordance to process larger workpieces.

The Charles Lathes Distinguish Themselves from Other Lathes on the Following Points:

• Very stable forged Steel Main spindle which is mounted on 3 points
• One-Piece Molded Bed (Very Stable) With Bag
• Hardened and Ground Guideways
• Hardened and Ground Gears in a Sealed Continuous Oil Bath
• Frequency Controlled Speed ​​40-2300RPM with 3 Mechanical Steps (Optional)
• Excellent Price-Quality Ratio

equipped with:
Chisel Holder
Steel Three-Claw Round 250mm
Cast Iron Four Claw Round 300mm
Fixed Glasses
Running Glasses
Bedstop
Threading Clock
Cooling Installation

available at extra cost:
Multifix Chisel Holder with 4 Bolts
Bison Three-Claw
Bison Four-Claw
Digital Readout Easson, Mitutoyo or Sony
Frequency Controlled Speed ​​in 3 Mechanical Steps 25-2300 RPM
Rotating Center, Chuck, Adapter Sleeves